DIY Peel Off Base Coat

 Have you ever been deprived of the joy of wearing glitter polish on your nails just because its hard to take off? Or do you stay away from dark colours only because its stains your nails on removal? The struggle is real! Well, here's a DIY solution to all that fuss....

 MATERIALS REQUIRED:

1.FEVICOL or any other PVA glue

2.Water

3.Old nail polish bottle

4.Nail polish remover

The first thing to do is to clean your old nail polish bottle. I used an empty white nail polish bottle. Pour a little bit of nail polish remover into the bottle and give it a nice shake. Then empty the contents out and repeat till most of the nail polish is gone from the bottle. Use a Q-tip and tissue paper to remove nail polish from the cap. After that's done rinse the bottle with lukewarm water and leave aside to dry.

Now, begin by filling the glue into the bottle till 2/3rd part is full. Then fill the rest 1/3rd with water. The glue won't dry on adding water as it is water-based. Close the cap and give it a nice shake. Don't shake too much though as bubbles may start popping out from it! And you're done!

HOW TO USE?

Apply a coat of glue on your nails and after it's dried matte, apply a base coat and polish your nails as usual with glitter or any colour you wish.

HOW TO REMOVE?

Just peel from the corner with your other hand's nails then use tweezers to remove it.

This can also be used as a substitute for liquid latex while doing gradients, etc.

Enjoy!